Skådis Command Strip XL Mounting Surface

This is an adapter for mounting your Skådis to a wall w/ 3M XL Command strips instead of screws! Those should hold at least 9kg load w/ 4 strips.

The gap between the peg board and the wall is the same as with the original screw mount, so it shouldn't interfere with other adapters.

The adapters should be printed sideways, so that the M4 nut insertation hole points to the sky. I printed mine w/ 3 perimeter lines and 25% infill (PLA), and so far it has lasted :>

Also do wet sand the gluing surface, so that the strip rly sticks!!!