Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support.
If you find this model useful, feel free to buy me a coffee.
Here's a super-strong, 2-part mini hook for all your hanging needs. Why is it stronger than most 3d-printed hooks? Because it is split into two parts so the hook can be oriented on the print bed in optimal strength position. In this orientation, the filament layer runs the length of the hook. If you were to print this all in one piece with the hook upright, the hook would easily break.
There are two versions:
WallHookStandard. Slightly bigger. Longer hook.
WallHookSmall. Slightly smaller. Shorter hook.
Print without supports. If the parts are too tight, sand it a bit or try compensating with Cura's Horizontal Expansion or PrusaSlicer's XY Compensation.
Attach to the wall with heavy duty mounting tape, or Command Strips. You can attach to your fridge with adhesive magnet tape.
I based this on an earlier two-part hook I designed that's no longer online. This improved version features a better fit and a sleeker backplate.
The author marked this model as their own original creation.