Miles Morales Spider-Man 3D Print - Streetwear Edition Figure - Spider-Verse STL

💙 Enjoying the Freebies? I love bringing these concepts to life and sharing them with you.
If you'd like to support the channel or sell physical prints of my designs, check out the links below:

🔓 Commercial License: [ https://www.patreon.com/cw/Fluid_Prints ]
☕ Buy Me a Coffee: [ https://buymeacoffee.com/fluid_prints ]

3D printing settings

For FDM (Filament)
Layer Height: 0.16mm or 0.2mm.
Infill: 5% - 10% .
Walls/Perimeters: 2 Walls .
Supports: Tree/Organic Supports are highly recommended -On Build plate only.
Supports : Top Z distance : 0.2