Rafts: No
Supports: No
Resolution: .2
Walls/Shells: 3
Infill: 10-15%
Filament: PLA
Designed using FreeCAD
Seedling Starter Cup Assembly
Cut a strip of news print roughly 150mm x 260mm then fold in half lengthwise.
Wrap the news print strip around the mold with the fold at the top.
Tuck the ends that over hang the mold into the centre starting at the seam.
Press and twist into the base to crimp the bottom closed.
Slide the paper seed cup off the mold.
Fill with dirt and plant your seeds.
The author marked this model as their own original creation.