Gotek Adapter for Sony MSX2 HB-F1XD

An adapter so you can swap out the original floppy disk drive with a gotek, paired with an OLED screen. I'm sure there are like 5 of you on this planet who might be interested in this.

Remember to get yourself these:

• Some tactile buttons
• An OLED screen as suggested by FlashFloppy (the 0.91 Inch 4 pin slim ones)
• A USB breakout board
• A SanDisk Cruzer Fit B35 16GB USB Flash Drive (SDCZ33-016G-B35)
• Some M3 hex screws and nuts

You can get an idea on how to wire things up by checking my photos. It should be pretty straightforward.

One thing you need to pay attention are the in-place buttons. Make sure you block out supports around those two buttons, so they can function with the tactile switches.

The USB disk parts was designed around the specific USB stick. Remember to print these with a raft and support. The cap part comes out better when printed upright.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Yes

Supports:

Yes

Resolution:

0.15

Infill:

15%

Filament: Generic PLA Red

Notes:

None.