Parametric box with FreeCAD 1.x files

I designed this parametic box as functional customizable 3D‑printable container for everyday use.

Print Settings

• Material: ASA recommended for maximum durability

• Layer height: 0.2 mm

• Infill: 100%

• Supports: Build‑plate‑only

• Extras: Filament change for the color transition

PETG and PLA should also work. If you don’t have a heated enclosure, PLA may be the most reliable option.

Model Information

You can change the following green values of the box in FreeCAD:

width ( y minimum 80mm) and length (x minimum 20mm)
box heigth (minimum 25mm)
lid height (minimum 25mm)

🔩 Hardware Required

• 6× M3 × 25 mm screws