CD DVD JEWEL BOX LARGE STORAGE
Description
PDFSooooo, I'm always in trouble as I take everything apart to fix stuff, but as many things require spare parts not available at the time, I am in constant need of small boxes.
I always wanted to do something with CD jewel cases, as they are transparent, and standard size - when I found the box organizer by Doupem, it made me think that I can make a box out of them. So I searched for a CD Case model to be used as the counterpart of the lid. However, I wanted to use the bottom sides of the cases too, so I made 2 variants: one with the top and one with the bottomside of the CD cases as lids on the box.
When printing, it is possible to go as low as ~50-55g PLA to be used: the walls are quite surprisingly sturdy when printing withsingle 0.4mm wall and 15-20% cubic infill.
I hope this gives a lot of CD cases a new, useful second life.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.32
Infill:
15-20%
Filament: Filaticum PLA Yellow
Notes:
Use single wall, 0.4mm, with cubic infill for a sturdy result. Don't use supports - bridging settings ought to be enough for this.
Printed at 200C hotend and 60C bed.Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.