PR2 Integrated N-Strike Rail

Print settings used for example:

• Resolution: 0.2mm

• Layer Height: 0.12mm

• Supports: None

• Infill: 50%

• Outer Wall Speed: 35mm/s

• Plastic: Shell is Yellow PETG-HF. Trigger is PLA Metal Iron Grey. 

• Other: Mouse ear brim recommended 

This is a great reshell. The hollow frames look incredible but I still wanted the ability to use the N-Strike rail while having the hollow frame on both sides. So I integrated the Nerf N-Strike rail directly into the shell rather than needing to print it as a separate piece. 

With high infill and using PETG the tabs are plenty strong enough in this orientation to mount the blaster to the bottom of another blaster. This orientation also improves the symmetry of the blaster keeping the trigger on the bottom of the blaster when mounted using the N-Strike rail.

I also removed the detailing on the outer face of the shell as these were not printing well due to how PETG performs with overhangs.