Clicky Boba Milk Tea Keychain

A clicky fidget keychain designed to look like a cup of boba milk tea (or plain milk tea if that's your preference).

What you need to print:

• Cup (plain or boba)

• Lid

• Straw

Standard Print Settings for 0.4mm nozzle:

• 0.2mm layer height

• 2 perimeters

• 15% grid infill

For the cup, you can print in single color and paint the eyes, mouth, and boba black.
Alternatively you can do multi color printing by painting the debossed surfaces with a second color in your slicer of choice.

The lid (without straw) is printed using a filament color change on layer (@ layer 16).

Colors used:

• Polymaker Matte Pastel Peanut PLA (cup and lid)

• Polymaker Matte Savannah Yellow PLA (lid)

• Polymaker Black (straw)

Additional parts required:

• Kailh Box White Mechanical Keyboard Switch

• Split Key Ring Kit

• Super glue (for attaching straw to lid)

Assembly:

1. Press fit keyboard switch into center hole of cup

2. Glue straw to lid

3. Align cross pattern of lid to top of keyboard switch and press fit