Stranger Things Funko Pop Stands – Custom Wedge & Pin-Lock System

Stop your Stranger Things figures from diving off the shelf!

Most generic Funko stands rely on a peg that often doesn't fit, or a "foot cup" that doesn't account for wide stances. This collection features a custom "Hybrid Grip" system designed specifically for the varying stances of the Stranger Things line.

How it works:

• The Wedge Grip (10 Characters): The walls of the stand are tapered—narrower at the back than at the front. As you slide the figure backward, the walls gently pinch the boot heels, holding them rock-solid via friction without damaging the paint.

• The Pin-Lock (Eddie & Demogorgon): For figures with extreme centers of gravity, friction isn't enough. These two stands feature custom-measured pins (Hex for Eddie, Round for Demogorgon) perfectly aligned to their foot holes for maximum stability.

This set includes custom-sized bases for 12 popular characters, measured with calipers for a perfect fit.

Key Features

• Hybrid Stability: Uses "Wedge Grip" for standard figures and "Pin-Lock" for the heavyweights.

• Jumbo Base (Demogorgon): The Demogorgon features a larger 72mm base (vs. the standard 58mm) to fully support its wide claw stance without tipping.

• Hidden Labels: Each stand has the character's name embossed on the bottom layer. It keeps the display clean from the top, but ensures you never mix up which stand belongs to which figure.

• Low Profile: A thin 2mm base keeps the focus on the figure, not the plastic.

Included Files

I have uploaded these as both individual STLs and a batch file.

Character List:

• Murray (40.8mm stance) – Wedge Grip

• Lucas (33.1mm stance) – Wedge Grip

• Dustin (31.6mm stance) – Wedge Grip

• Mike (Hellfire Shirt) (30.9mm stance) – Wedge Grip

• Steve (30.3mm stance) – Wedge Grip

• Max (29.1mm stance) – Wedge Grip

• Eleven (28.7mm stance) – Wedge Grip

• Hopper (28.7mm stance) – Wedge Grip

• Will (28.6mm stance) – Wedge Grip

• Robin (26.9mm stance) – Wedge Grip

• Eddie (Guitar) – Pin-Lock (Hex Pin, Right Foot)

• Demogorgon – Pin-Lock (Round Pin, Right Foot, 72mm Jumbo Base)

Printing Instructions

These print beautifully on any FDM printer (Tested on Prusa MK4S).

• Material: PLA or PETG.

• Layer Height: 0.20mm (Structural or Speed).

• Infill: 15% (Grid or Gyroid).

• Supports: None required.

• Ironing: Recommended. Enabling "Ironing" on top surfaces gives the disk a smooth, injection-molded look that blends in well with the figure.

Note on Text: The names are cut into the first layer. When you slice the file, check the bottom view—the text is mirrored so that when you remove the print and flip it over, the name reads correctly.