Remote Holder - Wall Mount - 1 to 4 slots - MMU Ready

A simple clean wall mountable remote holder with counter sunk screw holes. The holes are sized to accept a #8 drywall screw or similar. (5mm through hole with counter sunk chamfers). Available for holding various remotes including: Roku, TV, Disc, AVR, AppleTV, 4k, DVD, Fire Stick, etc.

The print is designed to be printed without needing supports, although you may prefer to add supports in the screw holes if desired. The models with labels feature flush text and were designed for use with MMU/Multi Color printers in mind. I have also included a model with no text/labels. The models also feature a slot on the bottom side which reduces a bit of filament and print time, but also allows you to insert a finger to push up the remotes from below if desired. All of the remote openings are the same size 55mm wide x 28mm deep which should accommodate nearly all remotes.

Lastly, I remixed the model for 1 to 4 remotes with various labeling to hopefully cover most use cases. Let me know if there is one you want added. Happy printing!

I added countersunk mounting holes to allow it to be wall mounted. I also created several versions with flush text that can be printed using an MMU or Multi Color printer. Lastly, I added a finger hole slot on the bottom side to prevent debris from getting stuck or to allow easier removal of small remotes. In addition to this, I cleaned up some of the geometry and edges and remixed it in many different flavors from 1 - 4 remotes.