Elegoo Centauri Carbon Vented Riser Corner With Humidity and Temp

The original design is of course, required for every ECC. I wanted to add a slot to install an inexpensive Humidity/Temp sensor that I could see from my desk. Simply used Fusion360 to cut a tiered slot into the original model's Front Left corner. The sensor sampling slots dictated that I use the Left side to sample chamber air. Seal is pretty tight, I guess you could use foam or glue to make it super airtight. Temp seems to match the displayed value on the ECC, I just wanted to see humidity at a glance.

Using Tree Supports worked well for me.

Update 1/6/2026: Added a second model for the Right Front

Simply used Fusion360 to cut a tiered slot into the original model's Front Left corner piece.