Raised Jugger Buckler Handle for 14mm and 12mm Carbon tubes

I print with extrudr flex hard/semisoft, 0.4mm nozzle, 0.3mm layerheight, standard flex filament settings, 15% cubic infill, 2 perimeters.

For the complete handle you need 120mm (for size L hands) 14/12 and 12/10 carbon fibre tubes.

Model is made for Right-handed juggers, mirror if neccessary.

I recommend cutting a shallow triangular depression about 6cm wide and 1cm deep into the EPP below the handle, it makes room for the fingers.

I epoxied it to my shield, and it has held for more than a year now.