Wonder Woman

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

#000000 PLA+ Sunlu Black Transmission Distance: 0.6

#9c0087 PLA+ Sunlu Fuschia Transmission Distance: 5

#d22332 PLA+ Sunlu Red Transmission Distance: 6

#ff8000 PLA+ Sunlu Orange Transmission Distance: 5

#ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5

#ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5

#ffffff PLA+ Sunlu White Transmission Distance: 5

This print uses 7 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Fuschia

At layer #10 (0.88mm) swap to Red

At layer #12 (1.04mm) swap to Orange

At layer #14 (1.2mm) swap to Pure Yellow

At layer #15 (1.28mm) swap to Skin

At layer #20 (1.68mm) swap to Pure Yellow

At layer #21 (1.76mm) swap to White for the rest.