This a tweaked version of my M2 Evo canopy that fits both the M1 Evo and the M1 plastic frame version.
A small 2s lipo extension is recommended to connect the battery, it can be then tucked inside the canopy out of sight.
Painting Tip. If you want to paint the canopy a fluorescent colour, then white filament must be used. Normally I would mask and spray the top half with my favourite colour. As the canopy is small and the top half is slightly raised with a lip, it was easier and quicker to paint it with a small brush. Any paint that goes over the line, just wait for the paint to dry, then scratch it off with a scalpel.
My canopies painted weigh 7.6g (one gramme more than the original) I printed them with PC fillament.
Happy flying
The author marked this model as their own original creation.