Jo-APS : An APS film development reel (Jobo-fit)

I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film canisters are very different too, so I also designed a set of "APS Canister Tools" that can be used to open the film gate and wind/unwind the film from the can. Check out my profile to see that project.

Obviously this is being offered on here so that people can make one for themselves (if you do, please let me know!), but if you would like me to print one for you, I'd be happy to for a reasonable priceI'd be happy to for a reasonable price. Just email me and we can hash out the details.

To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)

Print Instructions
 

Printer: MakerFarm Pegasus 10

Rafts: None

Supports: None

Resolution: 0.2mm

Print Speed: 40/sec

Infill: 20%

Filament: Any PLA

Nozzle temp: 205°C

Bed temp: 55°C

Notes:
Brim: If you find your print warping/curling at all, a brim will help. I found a brim wasn't necessary, but your situation might be different

Post-Printing:
Nothing special for post-printing. Just basic removal of the brim (if used). Also, depending on your printer's tolerances, the center hole may be a perfect fit for the tank's center core rod, or it may need some minor sanding. All printers tolerances are slightly different in my experience