XT60/LiPo Caps/Covers Set (Full, Half, Empty, Storage)

Protection covers for standard XT60 battery connectors (LiPo), you can also use color change to make them more contrast
57
163
5
918
updated March 17, 2022

Description

PDF

There are two version: SpringyWalls (recommended) and regular ThickWalls.
Make sure to turn on thin walls detection for the springy walls version.

My settings
Nozzle: 0.4mm
Layer Height: 0.30mm
Quality: Draft
Supports: No

Colored version
change filament on layers #4 and #7
https://help.prusa3d.com/ja/article/color-change_1687

Print Orientation
Flip models upside down so they are printed face down on the plate ("F" in PrusaSlicer) – they'll look great and won't require any supports

Tightness Adjustment
All printers and filaments are different, you might need to adjust scale of the caps to achieve perfect fit.
I suggest you print one piece first and try it. If it's too tight – upscale a tiny bit, if too lose – downscale. After finding the perfect fit – print as many as you need. The difference between perfect and acceptable fit can be 0.10-0.20mm, which is only 1-2% up or down.

Please come back and Like🤍 if it worked for you

Tags



Model origin

The author hasn't provided the model origin yet.

License