Makita RT0700C Router Insert Plates

I designed these insert plates for the makita RT700C Router. They help to minimze the gap between the milling tool and the support surface when the router is used upside down with the 195563-0 plunge base. This way, the tilting of the workpiece is prevented, which allows easier use of the router and betterrouting quality 

Design Features

• Optimal workpiece support - 9 different sizes ensure a minimal gap between the insert plate and the milling tool and stop the workpiece from tilting
• Flat work surface - The inserts sit flush with the bottom of the plunge base, so the workpiece cant catch on the edge
• Easy assembly - The inserts get attached to the plunge base with two M5x14 or two M5X16 countersunk screws
• Neat storage - The inserts are stackable and can be held in place wit a M5 screw
• May possible also fit the 196094-2 plunge base

Printing Parameters

• 0.4mm Nozzle 
• 0.2mm Layer height
• Support: Yes - under the mounting holes
• Infill: 20%