Spool holder with top mounting for Sovol SV06ACE/PLUS

Since the spool holder for the Sovol Sv06 ace / plus was too free.running and my filament got tangled, I've designed a new spool holder that makes it easy to unroll the filament without it getting tangled. All you need are 4 x 623ZZ ball bearings, the rest can be easily printed out. The original screws from the Sovol Sv06 Ace / plus are used.

I would recommend PETG / PETG CF or similar as the material for the printed parts.

For the print settings, 3 walls and 15% infill should be sufficient.

The spools can have a width of <104mm

Instructions on makerworld: https://makerworld.com/de/models/2110792-spool-holder-with-top-mount-for-sovol-sv06ace-plus