Divesoft Freedom Loop Hanger (Sidemount CCR) – Drying / Storage Hook

Divesoft Freedom Loop Hanger (Sidemount CCR)

This hanger is designed to hold the Divesoft Freedom breathing loop for drying, storage, and display. After a dive, hang the loop so water can drain and the loop doesn’t end up kinked, squashed in a box, or living its best life on the floor.

Features

• Simple, sturdy hook-style hanger for the Freedom loop

• Helps keep the loop open and organized while drying

• Compact shape — easy to keep in the workshop / dive room

Printing recommendations (FDM)

• Material: PETG recommended (tough + moisture-friendly). PLA works for indoor display but is least durable long-term.

• Layer height: i did 0.42 but use safe max for your machine

• Walls/perimeters: 3–4

• Infill: 20–35% (gyroid/grid)

• Supports: None (if your orientation matches the model design)

• Brim: optional if you have bed-adhesion issues

Orientation
Print in the orientation from the provided 3MF/STL.

Notes / safety
This is a gear accessory (drying/storage), not life-support equipment. Inspect prints for cracks, especially if you use it in cold environments or with heavy wet gear.

Changelog

• v1.0 – Initial release