PG36 Blind Stuffing-Adapter to 3xPG9 Cable Gland/ PG36 Blindstopfen-Adapter auf 3xPG9-Kabelverschraubung

PG36 threaded blind stuffing to close unused PG36-openings in housings.
Adapter for (1-3)xPG9 cable glands for smaller diameter wires.
Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread.

[1] Thread types:
  PG thread (PG36, PG9)

[2] Diameters for openings:
   Diameters for PG36 opening:
  a) threaded hole:                    45.5mm / PG thread
  b) drill hole without thread:  47.0mm
    Diameters for PG9 opening:
  c) threaded hole:                    13.9mm / PG thread
  d) wire diameter:                    8.0mm

[3] Sealing:
  An optional TPU-sealing model file is available for PG36.
  An optional TPU-sealing model file is available for PG9.

Print
Material:   PETG (blind stuffings, nut), TPU 95A (sealing)
Supports: not required
Brim:         not required
Serial printing (part by part) for better thread quality.

Materials
 1x        PG36 adapter                 (PG36 thread)
            [PG36_BlindStuffing_PGthread_to_3xPG9_PGthread_v00.stl]
 1x        PG36 blindstuffing nut (PG36 thread)
            [PG36_Nut_PGthread_v01.stl or
            [PG36_Nut_PGthread_v11.stl]
 (1-3)x PG9 cable gland             (PG9 thread)
            [see link]
 (2-0)x PG9 blind stuffing
            [PG9_BlindStuffing_PGthread_v00.stl]
 (2-0)x TPU sealing PG9 (optional)
            [PG9_TPU-Sealing_v00.stl]


Assembly
[1] PG9 cable gland pre-assembly
Screw PG9-cable glands (PG9-thread) into the PG9 openings of the adapter.
Close unused PG9-openings with PG9-blind stuffings.
Use optional TPU PG9-sealings if necessary.
[2] PG36-adapter assembly
Place the pre-assembled PG36-adapter (blind stuffing) in the PG36 opening and secure it with a PG36 nut.
Optionally place PG36 sealing on the PG36-adapter before assembly.
[3] Cable assembly
Guide cable through PG9 cable gland and fix cable by fastening the corresponding cable gland nut.

Hint: 
Apply some silicone grease on the thread, so it can be easily be assembled and disassembled.
(Without grease, the thread tends to wind on and off somewhat “sticky”.)

Links
[PG36 Blind Stuffing] (PG36 nuts, PG36 sealing)

[PG9 Blind Stuffing]  (PG9 blind stuffing, PG9 sealing)

[PG9 cable glands] (example)
https://www.amazon.de/dp/B07V9GPP6Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

[silicone grease] (example)
https://www.amazon.de/Liqui-Moly-3312-Silicon-Fett-transparent/dp/B00295DBQE/ref=sr_1_6?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=13P9WALTPP1IB&dib=eyJ2IjoiMSJ9.0en-W9socDknrZdX2QHaikS46OxFp0GJ9Qrc9p2bt_sKjnOY9bCpiqjMc6bTJJX2GGAZDBxyFX_vHtAnqCVileu1t4W11bgIF0aXKpUwCqC7DSgRVP-c6xECJn8HhOunDk_-Cz2POIH9U0bXfJyMWd3SdSM6knaFTvhn4Cc4ZFL8VTEusVhIc33B7H1cYgCJuClMYtl4kDc4aJ-qNqe-MWTY77wjShKFiTosBieXkSwQY1eBBUhSie5mSNMvEqX3tAcYhTJKOwUguJYAiHGZQ8TBibkkP7Ef3p1N8mYtmUw.4adOAarD_WA03sc4BXkRMfcwVv9uMV9lrrVtavEWGAs&dib_tag=se&keywords=silikonfett&qid=1765141206&sprefix=silikonfett%2Caps%2C125&sr=8-6