Unifi UACC-PoE+++-10G PoE injector 10-inch rack mount

I want to minimize cableclutter as much as possible for my 10"-rack (by MandicReally). This 90W PoE+++ injector from Ubiquiti (UACC-PoE+++-10G) is a big honker so I decided to design a 2U mount instead of having it laying in a messy tray. 

There's an endstop to ensure that the C5-plug doesn't interfere with the side of the rack and still leaves enough room for the RJ45 connectors in the opposite side.

It is a somewhat tight fit so you may have to wiggle and make sure that the bridges isn't pushed to far when inserting the injector.
Also consider using a bit of extra time to clean whatever debris there may be leftover from the supports.

I recommend using my .3mf to have the proper settings, but be aware that I have used 100% refill to make it as sturdy as possible.