The bracket consists of two parts that must be glued together. A pyramid-shaped tenon makes it easier to position them.
Each bracket is attached to the Skadis panel using one M4 screw. The file is created so that M4 brass threaded insert can be inserted.
The thin part of the bracket is printed by increasing the number of perimeters so that the LED strip can be attached using self-tapping screws.
Preferred printing characteristics:
- Material: PETG
- Infill: 15% gyroid or equivalent
- Perimeters: 2 (except on the thin part: 10)
***************************************************************************************************************
La potence est composée de deux parties qui doivent être collées entre elles. Un tenon pyramidal permet de les positionner plus facilement.
Chaque potence est fixée au panneau Skadis grâce à une vis M4. Le fichier est créé pour pouvoir insérer un insert fileté M4 en laiton.
La partie fine de la potence est imprimée en augmentant le nombre de périmètres afin de pouvoir fixer la rampe LED grâce à des vis autotaraudeuses.
Caractéristiques privilégiées de l'impression :
- Matériau : PETG
- Remplissage : 15% gyroide ou équivalent
- Perimètres : 2 (excepté sur la partie fine : 10)
The author marked this model as their own original creation.