Wreath Christmas ornament

A snap-together Christmas wreath that doubles as a photo frame. Two flat halves come together with hidden magnets. Bright and festive, it’s designed to be printed flat, assembled in seconds and hold your favorite memories of the year on a Christmas tree (or any metal surface :) ).

Printing Tips:

• Prints cleanly in standard PLA

• Prints with a standard 0.4 mm nozzle. Use the Fine preset for crisp details and smooth curves.

• No supports needed. Standard temps and speeds work; just slow top surfaces to ~20 mm/s for the best finish on the frame shapes. Ironing on a ribbon surface makes the finish extra smooth.

• For the bottom frame halves, a concentric top pattern gives a decorative, intentional look.

• Magnets: 8×2 mm (bottom) and 8×1 mm (top). The shells include internal magnet pockets - set a pause in the "Slice model" panel of your slicer right before the pockets close, drop the magnet in, confirm polarity, and resume the print. No glue required.

Filaments I used:

• Bambu Lab golden silk

• Bambu Lab matte red

• Bambu Lab matte green

Check the other Christmas ornaments here: