Ender 3 Pro X Stepper Cover - Hexagon

I do not know if the covers differ between the base Ender 3 and the Pro, or if different hardware was used for the original model, but my original screws for the X-stop switch were too long and went through the face of the stepper cover.

I thickened the cover to allow using the screws that came with my Ender 3 Pro.

You need to flip the X-stop to attach it to this stepper cover (the side of the X-stop PCB that has the micro switch and the plug face away from the hexagon-side of the stepper cover).

Printed in PLA:

• 0.4mm nozzle

• 0.2mm layer height

• 15% gyroid infill

• 2 walls

• 3 top/bottom layers

Made it thicker to use original hardware