Photo frame Christmas ornaments

A set of four snap-together Christmas photo-frame ornaments

Each made from two flat, magnet-linked pieces that assemble instantly into a festive frame. The collection includes a wreath, an acorn, a star, and a classic tree finial.

Printing Tips:

• Prints cleanly in standard PLA

• Prints with a standard 0.4 mm nozzle. Use the Fine preset for crisp details and smooth curves.

• No supports needed. Standard temps and speeds work; just slow top surfaces to ~20 mm/s for the best finish on the frame shapes. 

• Ironing makes an extra smooth finish on top surfaces, but it cannot handle holes in a surface well - I applied it to red ribbons (wreath) and golden frames (acorn and finial).

• For the bottom frame halves, a concentric top pattern gives a decorative, intentional look.

• Magnets: 8×2 mm (bottom) and 8×1 mm (top). The shells include internal magnet pockets - set a pause in the "Slice model" panel of your slicer right before the pockets close, drop the magnet in, confirm polarity, and resume the print.

Filaments I used:

• Bambu Lab golden silk

• Bambu Lab matte green

• Bambu Lab matte red

• Polymaker PolyTerra wood brown

• Polymaker PolyTerra earth brown

• Polymaker Panchroma celestial white

A wreath model is also available for free here: https://www.printables.com/model/1513948-wreath-christmas-ornament