CLICK – Open Frame Mini-ITX PC Case (3D-Print)

CLICK is a modular open-frame PC case designed specifically for Mini-ITX systems and fully optimized for 3D printing.
The design focuses on flexibility, clean open-frame aesthetics, and easy assembly, making it ideal for SFF enthusiasts, modders, and test or showcase builds.

The case can be built either as a screw-assembled version or a magnet-based version, depending on your preference.

Versions

🔩 Screw Version

• Traditional rigid assembly

• Maximum structural stability

• No magnets required

🧲 Magnet Version

• Fast assembly and disassembly

• Clean, minimalist appearance

• Ideal for frequent hardware changes

Hardware Compatibility

• Motherboard: Mini-ITX

• Power Supply: SFX

• PCIe: Riser cable required

• GPU Length:

  • Up to 320 mm with side support installed

  • Unlimited, if the side support is removed

Adjustable Center Bracket (Key Feature)

The center bracket is adjustable by 20 mm, allowing two main configurations:

• 2-slot GPU + CPU cooler up to 90 mm height

• 3-slot GPU + CPU cooler up to 72 mm height

Important Note on CPU Cooler Height

In theory, taller CPU coolers can also be installed.
In this case, the cooler will simply protrude above the top frame of the case. The open-frame design allows this without functional limitations.

Required Additional Parts (Not Included)

General (All Versions)

• PCIe riser cable:

  • 200 mm

  • Double reverse

• Heat inserts:

  • M3, 4 mm length

  • Required for every screw connection

  • Recommended: brass heat inserts, heat-installed

🧲 Magnet Version

• 14× magnets 6×2 mm

• 14× magnets 6×3 mm

• 6× countersunk screws M3×8

• 2× motherboard standoffs M3×6

• 1× power button Ø 12 mm

🔩 Screw Version

• 30× additional screws M3×8

• No magnets required

3D Printing Notes

• Designed for FDM 3D printing

• Recommended materials:

  • PLA+ (easy to print)

  • PETG or ABS (higher temperature resistance)

• Heat inserts are installed after printing

• All screw points are designed specifically for inserts

• Good layer adhesion is recommended due to mechanical load

Download Contents

• Complete set of STL files

• Separate files for:

  • Screw version

  • Magnet version

• Modular design for customization and modding

• Optimized geometry for reliable, warp-free printing