Skyrim-themed book basket

I am a very amateur designer. I did not make the SVG; it came from here: https://freesvg.org/skyrim, and the Dovahkiin font I used for the backside came from here: https://www.dafont.com/dovahkiin.font. The rest was designed and modeled by me. I use AI for inspiration or tips on how to properly use fusion sometimes, but I model and design myself. 

The dimensions are unironically somewhere around the dimensions of a copy of the Aeneid by Virgil that I had around. It is around 230x160x160. It should be fine to scale it down to fit a smaller printer. 

I'll try to take some photos of it later. I'll provide the general print settings I used here:

I printed this on a Centauri Carbon with Elegoo Rapid PETG with these settings(in OrcaSlicer):

• 0.20mm layer height(I used the strength preset on mine, then modified it)

• 0.4mm nozzle

• Outer brim

• Avoid Crossing Walls(Combing): On

• Outer Wall Speed 50-60mm/s

• 4 perimeter wall loops

• 15% gyroid sparse infill

• Slim tree supports for some of the text, critical regions only

I am sure there are better settings. As I said, I'm an amateur; I just enjoy making things. I haven't posted anything here before and will try to provide images later, but please correct me on anything I did wrong here or ask questions. I'll try to answer.

(I provided fusion 3d files, 3mf, and an stl, feel free to make whatever you want out of this, honestly, no commercial use because I do not own the icons and font used):