Modular frame for hueforge - with wall mount

I wanted to make some Andy Warhol Campbell soup style hueforges but couldn't find frame so came with this.

You can make any grid you want, from single frame to 6x6 frames or more, if your hueforges share some dimension, you can even make one row 150mm tall and second 250mm 

All parts are shorter than your hueforge so if you can print your hueforge, you can print this frame and use most of your bed.

No additional hardware required, just a little bit of super glue for connector covers.

Printing:

Print all frame pieces front side down, just connectors back side down

PLA will work for most parts but I recommend to print connectors from PETG.

Add mouse ears set to 80° angle for connectors

3 walls, 10-15% infill will work

Print one pin for test fit. 

-----------------------

Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)