Christmas bauble ornament circles ball/one piece

Christmas ornament… a 72 mm ball printed in one piece, with minimal supports only at the bottom, printed with Prusament Woodfill PLA, btw nice smell, slow print. HF nozzle 0.5 with a layer height of 0.25; it could probably be done even without supports or with fewer supports using a smaller layer height. Feel free to try it out — I'd be happy for any feedback.

vanocni baňka.. koule 72mm v jednom kuse, tisk s minimem podpěr jenom na spodu, tisknuto s prusament woodfill pla, pomaly tisk. HF nozzle 0.5 s layer vyskou 0.25, asi by se dalo i bez podper nebo s jeste min s mensi vrstvou, klidne vyzkousejte budu rad za feedbeck..