4" Inlet Suckit Compatible Dust Shoe

This is a 4" inlet shoe that is compatible with the suckit dust shoe mounting brackets for the SO3 with the HDZ upgraded Z-axis.

The light blue is the 2.5in Suckit dust boot that I bought. The black is the 4in dust boot I designed.

Here's the parts list to finish it:

Brass Inserts: https://www.mcmaster.com/94459a280

Socket Head Cap Screws: I bought a box of long ones and use my dremel to cut them down to the correct size since I was not sure what length I needed for the different locations. https://www.mcmaster.com/92196a152

1" Brush Strip: https://www.mcmaster.com/7900t1

1/4" x 1/4" Cylinder Magnets: I use these in my cribbage boards, so I already had a couple of hundred laying around. https://www.kjmagnetics.com/proddetail.asp?prod=D44

Here are a few other items for dust collection I have designed:

WEN 6321 Belt Sander 1.25" hose adapter

WEN 6321 Belt Sander 2.50" hose adapter

Bosch 5" Random Orbit Sander (ROS20VSC) 2.5" Hose Adapter

6", 4" and 2.5" Duct Adapters

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

.2mm

Infill: 

100%

Filament: Hatchbox PETG Black

Notes:

Getting the supports out of the back part of the dust shoe (near the slot where the bit passes through) requires some curved needle nose pliers like these here:

[https://www.amazon.com/Performance-Tool-W30732-Curved-Pliers/dp/B000N34924/](https://www.amazon.com/Performance-Tool-W30732-Curved-Pliers/dp/B000N34924/?tag=thingiverse09-20)

Category: Replacement Parts