Dart Zone Vector Pro Hammer Kit

Hammer Kit

One of the only complaints I see about the Vector is the appearance. This kit aims to match the aesthetic to its excellent performance. 

Designed to be modular and customizable. Switch from a full sized blaster build to a compact smg in seconds with the simple pin assembly. 

*Vector Pro not included. Cosmetic kit only.*

Buy the Vector Pro Here (non-affiliated): https://www.target.com/p/dart-zone-covert-ops-max-vector-pro-toy-blaster/-/A-94064487

Features

• No Hardware Assembly 

• No Blaster Modification (only disassembly)

• Pre-Grouped and Print Oriented Models

• New Modular Hammer Shroud

• Shroud Extension

• Tube, Fixed and Stubby Stock Options

• Carry Handle

• Decorative Front Plates

• Raised and Standard Iron Sights

Printing Info

Models are oriented how I printed them but you may have better luck with a different orientation. Models that I recommend printing with support:

• Vector_HammerShroud

• Vector_HammerShroudNSP

• Vector_ShroudRail

• All iron sight models

• Vector_CarryHandle

• Vector_PSAdapter

• Vector_PSStubbyPlate

• Vector_PSTubeStock

25% Infill or higher recommended. Pins can be scale adjusted in your slicer if they are too tight or loose. 

Recommended Tools

• Phillips Head Screw Driver 

• Super Glue

• Deburring Tool (optional)

• Hammer/Mallet (optional to help seat pins)

Installation

To install the Hammer Shroud, remove all screws and split the blaster shell. Remove the screws holding in the flywheel cage and remove the original shroud. Replace with the new shroud and reassemble the blaster. Be sure to pull the battery cable into the battery tray. If you find that your magazine doesn't catch as well after reassembly, loosen the 3 screws closest to the release. I find that if they are too tight, it struggles to catch.

The rest of the kit is assembled with printed pins and super glue that should be easy to reference to the photos. More information can be found in the individual model descriptions. If you have any questions or need a model adjusted, feel free to message me and I will get back to you ASAP!

Filament

• Elegoo PLA Plus (Orange and Black) https://us.elegoo.com/products/elegoo-pla-plus-3d-printer-filament-1-75mm-colored-1kg

Alternate Kit: https://www.printables.com/model/1444352-dart-zone-vector-pro-cova-kit

More Vector Compatible Accessories: https://www.printables.com/@Ghostmanta_3143708/collections/2724515