BMCC - BullMaster BMC Clone

KDxGP BMCC - A BMC Clone

Check out my socials and other things at https://linktr.ee/KDxGP

Like my creations?
Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP.
Thank you!

Instructions

On the top/lid there is no hole for a pump connection. This is on purpose so you can decide for yourself what fits best. Just make a appropriate sized cutout when slicing or modify the STL (e.g. in Blender).

Each size (e.g. 3.5" outer diameter with 2.0 mm wall thickness) comes in three different versions:

• 3.5in_2.0mm.stl : closed top/attached lid

• 3.5in_2.0mm_with_cushio.stl: closed top and attached cushion

• 3.5in_2mm_detached_....stl: top/lid, cushion and cylinder as sperated pieces so that thex can be printed individually and glued together afterwards 

Print it upside-down (top laying flat on bed). Print it solid (100% infill). The different wall thicknesses (1.2, 2.0 and 2.8mm) are chosen because of multiples of 0.4mm.  Choose number of perimeters accordingly (e.g. if you have a 0.4mm nozzle use 7 perimeters on the 2.8mm wall thickness version)

Changelog

2026-02-22: v2, 3.0", 3.25", 3.5", 3.75", 4.0" all in 1.2mm, 2.0mm and 2.8mm
2025-12-08: v1