Filament spool adapter for Ambiano food dryer (dehydrator)

Filament spool adapter for Ambiano food dryer (dehydrator). 

Made for using the device to dry filament spools (1kg).

The adapter is 300*250mm, with R50 radius at the edges. The wall is 10mm thick, because I wanted it to be stable and not deform under prolonged exposure to heat.

I made it from PETG. The additional ring is also printed with PETG. 

I cut the file in four parts in the slicer, with the dovetail option, because my printer is not big enough... The parts fit better, when you sand the dovetail edges a bit after the printing. The wall parts are printed with support for the dovetails and brim, 2 walls and 15% grid infill. The project needs about 125m of Filament and 15-16 hours of printing with default PETG slicer settings. 

Dryer specification:

Ambiano (ALDI) Model: FD21_08111

Week/Year: 31/23

Item Nr.: 1015332

350W

Temp: 40-70°C (in 5° steps)