Soldering fan hood with filter

This model is composed of two parts:

1. Filter holder with therd-hand mount

2. Front plate for fan switch and camera accessory shoes (ISO 518:2006)

What you need:

• 1x 80mm PC fan

• 1x 1cm thick activated carbon filter

• 4x M3x20mm screws

• 2x M3x12mm screws

• 6x M3 nuts

• 1x micro slide switch

Assembly:

1. Mount the front plate with the 2 M3x12mm on the aspiration side of the fan (screws from the front and nuts beinde the fan holes)

2. Add the micro slide switch in the cut-out

3. Mount the filter holder on the exhaust side of the fan (insert the prolungation into the beinde of the front plate)

4. Insert the filter betwean the filter holder and the fan

5. Add the 4 M3x20mm on the filter holder throw the filter (screws from the front and nuts beinde the fan holes)