Pinecil V2 Dremel Press Adaptor Workstation 220

This adapter mount is designed for use with the Dremel Workstation 220 and the Pinecil V2 soldering iron for applying heat inserts. It fits centrally within the Dremel holder and is secured using a 3/4 inch x 12 revolutions per inch (12rpi) nut.

 This model was modified from Fatman80s Model

BOM (Bill of Materials):

M3 Nut: QTY = 1

M3 x 8 Socket Cap Heat Screw: QTY = 1

Material:

Any Material will work. I printed in PLA.

 Slicer Settings:

Wall Thickness = 0.2

Infill = 20% minimum

Supports = Tree Supports Enabled

Wall Loops = 3 minimum

Orientation = Thread facing up 

Modified to fit Pinecil V2