The Sphere - Mono-Color - EDITION 2025

The Sphere

The design is intended to maximize the potential of 3D printing. The individual ornaments are recessed into the surface and aligned at their own angles.

The models are optimized for printing without a support structure. Slightly rough overhangs may occur on the inside, but these are no longer noticeable after assembly.

No screws or glue are required for assembly. The printable molds are helpful for pressing together. This may require some force. Simply feel your way and, if necessary, use your entire body weight (max. 100 kg).

Print-Settings

• 0,4mm Nozzle

• 80-100% Fan-Speed

• 3 walls

• Arachne wall generation

• Gyroid infill

• No supports needed

• Thick bridges

Licence

• All photos uploaded are of the actual printed model and protected by copyright.

• If you are interested in commercial use, please contact me directly.