Salt (pepper) dose

Salt or pepper dose printed with transparent PCTG (Spectrum).

Print settings:
material: PCTG transparent (Spectrum)
nozzle diammeter: 0.4 mm
extrusion width: 0.5 mm
extrusion multiplier: 103% (1.03)
layer height: 0.1 mm
perimeters: 1
infill: 100%, aligned rectilinear
cooling: minimum 0%, maximum 20%, for overhangs 35%
supports: no
speed: 1 mm^3/s (20 mm/s)
nozzle temp: 270°C
bed temp: 85 - 90°C
chamber temp: 40°C

Use dry filament, print very slow with maximum nozzle temperature for your transparent filament, minimize cooling.

STEP and FreeCAD files included

Edit 20251208: added pepper lid STL

Lucky printing