PCB-themed Christmas tree ornaments

Unique and decorative multicolor Christmas ornaments with stylized PCB traces. No multi material unit is required to print them - just one filament change. The ornaments are roughly 10 cm in diameter and weigh in around 25 g each.

 Colors @ 0.2 mm layer height are:

• Red, green or white (layers 1-20)

• Silk copper, silk gold or similar (layers ≥21)

If you like the style, have a look at the stand-alone PCB Christmas tree design :)

Print settings

• Layer height 0.2 mm

• Line width 0.4 mm ("Arachne" slicing engine recommended)

• Infill 15% ("Lines" recommended)

• 3 wall lines

• 5 top & 3 bottom layers

• Supports not required

Approximate print time @ 60 mm/s: 1:45 h