Power Cord Organizer Holder (Double-Sided Tape Mount) | Kitchen Appliances

Are you struggling with tangled and excessively long power cords behind your kitchen and other appliances? Not all manufacturers provide a solution for tidying up the power cord—this holder will help you organize standard power cables!

• The Problem: Messy excess power cords tucked behind appliances.

• The Solution: The holder allows you to organize cables with a diameter of 5 mm, 5.5 mm, or 6 mm thanks to its different openings. (One wing opening has a height of 5.5 mm, the other 5 mm, and the central part 6 mm).

• Variants: Two lengths of the holder are available—larger and smaller—to accommodate different appliance sizes.

• Aesthetic Options: The possibility of choosing two colors for the holder—white or black.

📏 Dimensions (Printed Version)

• Larger Holder: Total length approximately 123 mm, "wing" length approximately 30 mm, width approximately 30 mm.

• Smaller Holder: Total length approximately 84 mm, "wing" length approximately 20 mm, width approximately 30 mm.

⚠ Mounting and Safety Guidelines

• Mounting: The holder is mounted using double-sided tape (tape not included in the kit).

• Surface Preparation: Before mounting, the surface of the appliance where the double-sided tape will be applied must be thoroughly cleaned.

• Safety Warning: Be sure that the installation does not impede cooling/ventilation (if the device has it) and is not mounted in a place that gets very hot. You must attach it with attention to all risks and safety guidelines for the use of the appliances.

⚙ Printing Tips

• Material: PETG is recommended for better resistance to elevated temperatures in the kitchen environment.

• Infill: 20% is sufficient.

• Orientation: Print lying flat.