A4 Paper Clip Holder Mount for Monitor | Eye Strain Reduction & Desk Organization

This holder is designed to mount onto the monitor bezel, suitable for both flat desktop monitors and laptops. Do you need to transcribe text from a sheet, frequently reference software instructions, or are you running out of space for sticky notes? Stick all your notes onto an A4 sheet and attach it right next to your screen!

• Increased Efficiency: Helps when transcribing text by reducing eye strain and increasing efficiency by eliminating constant head movement (desk / monitor).

• Space Saving: The paper does not take up space in front of/behind the keyboard or on the desk. It also creates extra space if you use "yellow sticky notes".

• Compatibility: The holder can be mounted on monitors with a maximum thickness of 20 mm.

• Design Note: Mounting is designed for the right corner of the monitor. It can be used on the left side, but the option to retract the flat bar will be unavailable.

🛠 Assembly Instructions and Components

Adjusting Clamp Opening (Monitor Mount):

To attach the holder, loosen the two top hex screws. Press the movable part to adjust the opening, clamp it onto the monitor bezel, and tighten the screws.

Flat Bar Retraction:

The holder allows the flat bar (used for clipping papers) to be loosened. After loosening the knob, the flat bar retracts to the back of the monitor, saving space beside the screen.

Required Hardware (to be sourced separately):

• 2x Paper Clips (Clips included with the model)

• 2x M5 Screw

• 2x M5 Nut

• 1x M6 Nut

• 1x M6 Screw

• 1x Knob (3D printed part)

Dimensions:

• Flat Bar Length: 240 mm

• Flat Bar Width: 25 mm

• Monitor Mounting Element: Length 45 mm, Height 31 mm, Width 50 mm

⚙ Printing Tips

• Material: PLA or PETG.

• Infill: Suggested 30-50% for rigidity of the mounting element and flat bar.

• Hardware: Refer to the list above for required metal parts.