Skadis tray - space saver *updated*

I hadded a before and after set of 2 images to show how much space can be saved.

*edit:  I modified the width of the box to removed the gap if you put 2 or more side by side. I will leave the older model available too. 

Print settings

Nozzle size ......................... 0.4 mm

Layer height ....................... 0.2

Number of perimeters ... 2 (or more)

Infill ...................................... 15% (or more)

Supports ............................. support only for hooks

Bed surface ......................................... glue stick + brim(pla)

Hotend temp ...................................... 240c / 210(pla)

bed temp .............................................. 80c / 60(pla)

Materials used: .................................. PETG / PLA