Construction Modules

Hello there!

This was a project that we made in my career, Industrial Design and Product Development Engineering (1st Year, Second Quarter, Subject: "Design Methodology").

The objective of the project was the design of a module, like a construction set, that allows the building of infinite structures. The pieces will insert themselves into others in order to create the structures.
The thickness had to be of 10mm, so once sketching we had to draw 10x10mm squares to create the connections.

The design of the module had to be created by adding or subtracting geometrical basic shapes (polygons, circles...) or combination of several shapes.

The STL file was created in Fusion360. It's s the original one that I presented .
The OpenSCAD file was part of a Practical Class in Mathematics II. We were asked to create the same design of our module, but it had to be parametric, so if you want to modify the file, you are free to do it! ;)

Print instructions

Rafts:
Yes

Supports:
No

Resolution:
0,15mm

Infill:
10%

Notes:
-Sliced in Slic3r PE at 50% scale
-Total print time: 39min (average)(printing 1 module on each print)
-I used rafts just in case, but they are not really necessary

GCODE ATTACHED IS FOR PRUSA PLA