A sleek, adjustable spotlight you can 3D print yourself. Designed around standard GU10 bulbs, it’s affordable, easy to assemble, and stylish enough for any modern interior — perfect for accent lighting in living rooms or as a precise spot in your workspace.
There are custom modifiers for applying fuzzy skin on the surface!
Designed around GU10 bulbs
Step-by-step assembly instruction
Adjustable beam - 180° on both rotating hinges
Minimal footprint
Safe and sleek cable routing
Modular mounting
Budget friendly
Fuzzy skin modifiers
If you have any questions, feel free to ask. Otherwise, happy building!
⚠ Mains voltage
GU10 bulbs operate at mains voltage. If you’re not sure what you’re doing, please do not proceed.
Step-by-step assembly instructions are available via pdf download
4 Perimeters
20% Infill
Tree Supports - only on print surface
Random seams (for applying fuzzy skin)
For selected parts there is a modifier available to apply fuzzy skin. Just import the modifier and apply fuzzy skin at right place to it!
I use fuzzy skin thickness of 0.2 mm and fuzzy skin point distance of 0.5 mm, but feel free to experiment.
You can find additional information on modifiers and fuzzy skin on prusa's support page.
Hardware | Qty |
|---|---|
GU10 socket - 15cm cable recommended | 1 |
Wago 221-2411 connector | 2 |
M3 x 20mm | 4 |
M3 x 6 threaded pin (set screw) | 1 |
M3 nut | 5 |
'small' zip tie | 3 |
Mains cable | 1 |
Optional: heat shrink tube |
There are different attachment plates for easy mounting:
Screw mounting
Magnet mounting (10mm disc magnets required)
Blank plate, for geometry changes and custom mounting plate (step file available)
I like to use double sided tape for mounting. A strip of mirror mounting tape works reliable.
The author marked this model as their own original creation.