Drive Tray Cover for XBOX 360 (Phat)
This is a replacement cover/bezel for the drive tray on an Xbox 360 original ("Phat") model.
20
132
1
1012
updated February 23, 2023
Description
PDFThis is made in two parts for printability and aesthetics. The two parts can be assembled with small screws (~M1.8×3mm, ~3.5mm head diameter) or glued.
Print the bracket with the largest face down (holes facing downward). Print the face standing upright for the smoothest finish.
Supports are required for both, but only minimally applied.
Tags
Model origin
The author marked this model as their own original creation.
