Elegoo Mars 3 Angled Build Plate Holder (2020 extrusion)

This is a holder for the build plate for the Elegoo Mars 3. It holds your build plate at a 45-degree angle to the ground for whatever purpose you choose. This model may be a little better suited for drip draining your prints once the print is done, but I'm sure you can find other uses. I have tested this with my Mars 3 build plate, but if the mounts are the same as any of the other Elegoo machines, it will also work for those build plates as well.

My main use for this is holding my build plates after prints are washed while I thoroughly dry them before curing, and for general storage. 

I modeled in a hole for an M3 SHCS to hold the model to the 2020, but the fit is snug enough that I personally do not use it. This also lets me quickly pull the mount off the 2020 and rotate it to whatever orientation I want. 

I have also tested it with Misumi 2020, and generic 2020 from Ali, and it fits both.