Angled Mount for Lenovo Tab M10 Plus Gen 3 - Skadis Remix

This is a variant of the wall mount that @TrailBlazer_511546 created for the Lenovo M10 Plus 3rd generation tablet. I wanted to mount mine to an IKEA Skadis board, so I combined it with the T-Clip system by @LineArcLine. I also added a fifth hole that you can use to route a cable into the mount - which will probably require widening one of the holes in the Skadis board with a drill to be able to fit a cable (use a cable with a 90° plug to make it fit within the mount).

I've had success printing the two parts lying on their short sides, with minimal supports. In addition to the files included here, you will need four of the T-clips from the T-Clip system. Other than that, this should be rather straightforward.

A big thank you to the two original authors of the models I used here, and an extra thanks for releasing them under a license that allows me to publish this remix.

Combined the original model by @TrailBlazer_511546 with the Skadis T-Clip system by @LineArcLine.