Vintage Christmas Santa's Boot Hueforge

This charming holiday artwork features a classic Christmas boot filled with candy canes, pine sprigs, holly, and an adorable teddy bear peeking out from the top. Surrounded by an ornate circular border of swirling red and gold flourishes, snowflakes, and festive accents, the design blends vintage Christmas warmth with bold, cheerful colors. A perfect piece for seasonal décor, prints, and holiday displays, this illustration captures the playful magic of Christmas morning.

Project: Santa's Boot.hfp 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

The Model is 200x200mm in size 
You may print at higher layer heights below the Base Thickness of 0.64mm 
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm 

Filaments Used: 
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6 
#3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4 
#e4bb4c PLA Overture Matte Yellow Transmission Distance: 3.6 
#f9ece4 PLA Kexcelled Skin Transmission Distance: 4.4 
This print uses 5 unique filaments 

Swap Instructions: 
Start with Black 
At layer #9 (0.8mm) swap to Mistletoe Green 
At layer #12 (1.04mm) swap to Red 
At layer #17 (1.44mm) swap to Yellow 
At layer #21 (1.76mm) swap to Skin for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase various Heavy Metal inspired hueforge pieces. This collection is nostalgic blend of vintage holiday charm and ornate festive details, this collection brings classic Christmas magic to life in every design.

✨🎄 Vintage Christmas Collection 🎄✨

Want to sell your physical prints of this model? A commercial license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of online tools to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.