Bed Scraper XL Holder - Core One

Holder for the Bed Scraper XL [https://www.printables.com/model/832209-optimized-bed-scraper-xl] that fits nicely on the outside of the Prusa Core One.

Materials

You will need 3x Ø10x3mm magnets.
I use Neodymium magnets, but the design should work with weaker magnets as the bed scraper tool is very light.

The fit is quite snug, but depending on the material used to print the part, you might need a little bit of glue.
I've printed it in PLA and PETG. The PLA part didn't need any glue, while the PETG did.

Print Settings

- Filament: Jet Black PETG (also printed it in Lipstick Red PLA)
- Nozzle: 0.4mm HF
- Layer Height: 0.2mm
- Infill: 15%, Grid