maralyn munroe coasters

I made these Maralyn munroe coasters but I have split them in case you want to scale them up and print them separately as pictures (remember if you make them bigger the thickness must remain 2.24mm

here are the filament changes :

Project: maralyn.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Max allowed Thickness is 2.24mm

 Swap Instructions: 

Start with Black 

At layer #9 (0.8mm) swap to  Blue Gray

 At layer #13 (1.12mm) swap to Grey 

At layer #16 (1.36mm) swap to White for the rest.